Power Hauler
Power Reel System
Click Here to see a larger photo


Click to see larger image

Power Hauler HD923 Power Reel System

This is our innovative Power Hauler HD923 Power Reel system with self-coiling line reels. Our exclusive Power Reels are self-coiling, removable, and stackable making for a virtually hands free operation.

The HD923 Power Reel system will both deploy and retrieve your gear eliminating the need to hand coil or deploy the line. When retrieving gear the Power Reel drive pin is set to engage the drive shaft to wind the line onto the Power Reel. When deploying gear the Power Reel is reversed on the drive shaft which allows the Power Reel to spin freely to release the line as the gear sinks to the bottom.

Power Reels have an approximate capacity of 200 feet of 5/16 in., 300 feet of 1/4 in., or 500 ft of 3/16 in. (such as Sampson Tenex sinking line) which would take up less the 1 square foot of deck space stacked. This means that if six Power Reels with 200 ft of line were stacked three high would total 1200 ft. of 5/16 or 1,800 ft. of 1/4 of line and use less than 2 square feet of deck space.

Additional Power Reels are located in the Online Store Accessories section.

Having both power up and down control the HD923 Power Reel system is equipped with our heavy duty 2.3 hp 12 volt worm gear power drive and zero maintenance sealed oil bath roller bearing gearbox. The power drive has a 90:1 gear ratio for higher torque (pulling power) which pulls up to 120 feet per minute.

Checkout the Power Reel video in the video gallery of our website

Power Hauler Power Reel Includes :

  • High impact ABS Power Reel with 100 ft. of 5/16 sinking mainline.
  • Unique locking drive shaft that secures the Power Reel when in use.
  • Power up and down control with a momentary spring to off power switch.
  • Heavy duty schedule 80 aluminum tubing and 1/4 inch motor plate.
  • Low resistance 6 gauge easy flex wire harness with an auto resetting breaker.
  • Folbe open face chain-link pulley block with a stainless quick link for mounting.
  • Custom motor cover that protects while maintaining a professional look.
  • 3/8 stainless wire lock hitch pin to lock the davit into fishing/stowed positions.
  • 1/4 in. pulley block bracket.
  • Aluminum davit end cap.
  • Premium UHMW sleeved gunnel mount and your choice of our sleeved flat or combo base mounts.
    Other mounts available - see brackets department

150 Lbs. Pulling Capacity.

Click here for more
Information and pictures

Price: $ 1595.95

Both a premium UHMW sleeved gunnel (upper) mount and a UHMW sleeved base mount (floor) are included.

However, you have a choice between two styles base mounts depending on your need.

If unsure we suggest the combo mount since it provides more options in mounting. We also carry non-standard brackets and also manufacture custom mounting brackets. Please contact us for more information. See mounting brackets section for more images and descriptions.

Please select which base mount you prefer:


PN: 151923

UPC: 637405977301

*Patent Pending



1 of 1 Items